Okay, I am in the process of tweaking the Balaam (my new era Hector-Class ship) and have made some adjustments to the sensor turret. I thought that, perhaps it might be useful to others to have the stats for such a salvaged sensor turret to use in their own settings, so here they are:
TL 12 Salvaged Sensor Turret
(The following is added to a ship's normal stats)
General Data
Price: MCr16.6505
Mass: 21.324
MW: 34.293
Surface Area: 192 m2
Tech Level: 12
Electronics
Computer: 1xTL12 Mod Flt. Computer (0.04 MW)
Commo: 1xTL12 1000 AU Maser Comm (0.6 MW), 1xTL12 150,000 km Radio (5 MW)
Sensors: 1xTL12 120,000km PEMS (0.15 MW), 1xTL12 300,000km AEMS (27.5 MW), 1xTL12 Desitometer (1 MW)
Controls: 2xTL12 Standard Workstations
Damage Tables:
Surface hits are based on the percentage of the surface area of the ship this turret is installed on and can not be calculated here. See the notes section for a breakdown of surface area if you wish to detail out what antenna gets hit on your ship.
Area Internal Explosion*
1 1-8:Flt Comp, 9:Maser Comm, 10:Radio, 11-20:PEMS Processor
2 1-6:PEMS Processor, 7-20:PEMS Antenna
3 1-2:PEMS Antenna, 3-20:AEMS
4 1-20:AEMS
5 1-19:AEMS, 20:Densitometer
6-12 1-20:Densitometer
13 1-15:Desitometer, 16-20:Workstation
14-20 1-20:Workstation
*All results are "elec", this table just provides a bit more detail
Systems
All-(1h)
Notes
All systems fit in a standard 3 DT turret (cost of which is not included here).
3.528 m3 are available for internal armour (not included here).
The flt computer (and TL 12 dynamic linked controls) only allows operation of the electronics, it does not use its computer control modifier in any step in the ship design process.
The two standard workstations may be replaced with a single bridge workstation if the parent ship requires an official bridge. Just subtract 0.2 kg and MCr 0.0015 from these figures. Additional TL 12 workstations may be installed on a ship to link to this turret, but their use of the electronics in this turret is exclusive to their use of other installed electronics if of a different TL (i.e. they can't both use the turret and sensors elsewhere on the ship at the same time, but they may alternate between them).
Surface area required by this turret (192 m2, which includes the 10 m2 for the turret) is far greater then the area the turret itself uses. Sufficient area must be available on the parent ship's hull in order to install this turret. Surface area breaks down as follows: PEMS antenna: 30, AEMS antenna: 11, Maser comm: 1, Radio: 50, Densitometer: 100.